What is a Good OBP in Baseball?

Question: What is a Good OBP in Baseball?

Answer: More baseball enthusiasts realize how significant a base percentage (OBP) is in assessing a big-league baseballer’s offensive performance.

After all, the average batting is a restricted measure. Despite its historical significance and history, it leaves its marks out of its equation.

But if you understand the significance of OBP, one ends up asking, “What’s a fair percentage on the basis?”

Most of us have a hazy notion.

400 is great. 350 is decent. 300 is not so nice or less than good.

Before we respond definitely to this issue, let us remember why basic percentage in baseball is so essential to begin with.

Why On Base Percentage Beats Batting Average

A disagreement may ask why baseball now favors the average batting while assessing a batter. After all, the individual is termed “a hitter” – aren’t hits what?

Well… no. Well… no. Hits are wonderful. Hits are amazing. Hits are crucial. Hits are important. Hits are even better than walks, to be fair.

But that’s not a lot better.

After all, what is any baseball player’s most essential job? It’s not about getting a hit. Rather, the biggest duty of any batter is not to do a thing.

It’s to reach the base, in other terms. After all, when a batter reaches the base, it frequently implies that no one has done anything on the field.

Why doesn’t it make a difference? Why is it much more important for the hitter to strike the base or even ride?

Think back to your previous economics courses to answer this. I realize that you probably don’t want to think back, since the same thing here, but hear me out.

One of the main drivers of an item’s value is its scarcity. When the demand for an item is high and the item is scarce, the price rises up.

Because everyone wants it. because everyone wants it. You are ready to pay top dollars for it. Scarcity is essential. Well, in baseball too, scarcity is important.

What’s one of the scarcest ball game resources?

Outs.

Because a team receives just 27 outs. And you have no more opportunity to score at the conclusion of 27 outs. That implies you lose if you are behind in the score.

And it’s terrible to lose. It is thus essential not to do anything. Every time a batter doesn’t perform a job, it raises the odds that your team scores a run or many runs.

The ultimate objective of the game is to score more runs than your opponent. Naturally, a hit enables you to score. But a stroll does. Because you don’t do a thing while you stroll and save your limited resource.

The base percentage is better than the batting average since it better reflects this precious resource and the biggest task of a hitter – not a job done.

 

Related: What Does PO Mean in Baseball?

What Does Mean Good OBP in Baseball?

Baseball is a game with many statistics. It may be the most analytical game for experts, especially because of its speed and capacity to truly dig down the statistics and compare them with others in the range.

Most Major League Baseball organizations (MLB) have an Analytics Department that works tirelessly to break down and analyze the statistics very closely to assess the team’s composition and how game adjustments are made.

You may have observed that defense shifts are considerably more common nowadays and clubs are prepared to make these changes on the basis of the player’s analytics. The benefits exceed the danger, but far less occurred before the analysis was done.

Gaining a lead for the lower market clubs is an important step in competing with potentially excellent analytics players who may not be paid like other big names players. Some companies build their teams to suit their requirements and have paid off for many of them.

So, What is OBP in Baseball?

OBP is the base percentage and indicates how many times a player reaches the base. Players reach the bottom of this metric successfully by hitting, walking or hitting by pitch. Other methods to reach the base include the mistake and the decision of a fielder. None of these are good for OBP.

This is more significant than the average batting for many organizations, mainly because it is accurate to say how frequently a player reaches the base. If a player goes a lot, it’s a positive thing and should be taken into account. When the average batting is the sole formula utilized, it includes just whether a player gets an actual hit and does not include walks or hits per pitch.

Below is an outline of the following OBP-related issues:

  • What is a Good OBP
  • All Time Leaders in OBP
  • How Stats Have Impacted Baseball
  • Other Key Stats in Baseball
  • How to Improve OBP
  • Related Questions

What is a Good OBP in Baseball?

OBP is such a significant figure because it provides more value to those players who go a lot or get hit by pitches. They’re on the base and players have a chance to score while they’re on the base.

A excellent baseball OBP is .360. Below is a sliding scale from good to horrible up to OBP. The basic percentage is usually assessed at about 60 points over the average batting. A decent average baseball is 300 in the MLB, therefore the MLB has an excellent OBP of 360.

Below is a diagram that illustrates the importance of OBP in the MLB and how:

Rating OBP (On Base Percentage)
Excellent .390
Great .370
Above Average .360
Average .320
Below Average .310
Poor .300
Awful .290

OBP is long-term measured. Players in 500 plate appearances now have stability and companies are now placing great importance on players who constantly reach the basis.

The reverse may also happen if batters hit the baseball a long distance and generate a lot of RBI (runs batted in), but don’t get on a lot. Organizations must then determine whether they want to play a player that strikes out and doesn’t get too much on the base. But when they make contact, they typically score on extra bases and drive runners.

All Time Leaders in OBP

A nice mix of players is constantly available who have a high OBP in the MLB. These gamers are often chic about the slots they swing at, and because of this many times there are high averages. Players that swing in poor slots usually have higher, but not a large OBP percentage.

Here’s a list of OBP’s top ten all-time leaders

Player On Base Percentage (OBP)
Ted Williams .4817
Babe Ruth .4739
John McGraw .4657
Billy Hamilton .4552
Lou Gehrig .4474
Barry Bonds .4443
Bill Joyce .4349
Rogers Hornsby .4337
Ty Cobb .4328
Jimmie Foxx .4283

 

Related: What Does QAB Mean In Baseball?

 

What is a good on-base percentage?

Whenever someone asks me for anything like that, I must be honest – I’m not so sure off the top of my head. Like, beneath . I know Three hundred is certainly terrible. Surely 400 is excellent, but what about 340? Is it excellent, or just all right? Is .380 incredible, or pretty good?

Certainly, in the delicate subtleties of OBP (or SLG) variations I do not have the same highly honed understanding of the same manner I have for the batting average. I once thought “would OBP create a decent league-leading average batting?” And that’s probably all right for a thumb rule. But lately, I was thinking of a method that I believe might make a little better light on the issue.

What I did was: I took all BA hitters in 2008-2012 and found the mean and standard deviation for BA, OBP, SLG and OPS. I then generated z scores for each of them which correlate to the z scoring for the average batting, so that you may tell us how a certain OBP, SLG or OPS compare to a certain BA amount. Behold!

Here are the means and SD’s for each of them:

Stat BA OBP SLG OPS
Average .276 .345 .448 .793
SD .027 .033 .066 .091

For daily positioners you can see that the batting average of 0.276 is average, approximately as excellent as 0.345 OBP, 0.448 LG and 0.793 OPS. Using z-scores where z=(x-mean)/SD, here are the alternative BA values:

BA OBP SLG OPS z Grade
.200 .252 .262 .537 -2.82 F
.210 .264 .287 .571 -2.44 F+
.220 .277 .311 .604 -2.07 D-
.230 .289 .336 .638 -1.70 D
.240 .301 .360 .672 -1.33 D+
.250 .313 .384 .705 -0.96 C-
.260 .325 .409 .739 -0.59 C
.270 .338 .433 .773 -0.22 C+
.276 .345 .448 .793 C+/B-
.280 .350 .458 .806 0.15 B-
.290 .362 .482 .840 0.52 B
.300 .374 .507 .874 0.89 B+
.310 .387 .531 .908 1.26 A-
.320 .399 .556 .941 1.63 A
.330 .411 .580 .975 2.00 A+
.340 .423 .604 1.009 2.37 A++
.350 .435 .629 1.042 2.74 A++
.360 .448 .653 1.076 3.11 A++
.370 .460 .678 1.110 3.48 A++
.380 .472 .702 1.144 3.85 A++
.390 .484 .727 1.177 4.22 A++
.400 .497 .751 1.211 4.59 A++

So, if you hear that a guy has a.366 OBP and you are wondering if it’s excellent, simply check this chart – approximately a.293 batting average correlates. It’s pretty-good-not-good, so you go there.

This is another rule of thumb: These OBPs are nearly precisely 1.25 to BA, the ratio of SLG to BA about 1.66, and OPS almost 2.9 times BA. A good OBP is 5/4 as much as a good BA, a good SLG is about 5/3 as much as a good BA and a strong OPS is around 3 times the value of a good BA.

 

Related: How Long is a Baseball Game?

 

How to Improve OBP

Increasing OBP requires a high average, a strong eye on the board and the lowest possible strikeouts. Contacting the plate is an important step towards increasing OBP. Younger players should be particularly proud to draw a walk, to be choosy on a plate and finally to play the ball.

For OBP, additional baseline hits are not as significant as slow percentages, or OPS, which is the sum of OBP and slow percent. This status emphasizes more than OBP on additional basic hits.

Tip #1 – Increase Swing Speed

Swing speed is essential to be a great hitter. Improving OBP means playing the ball and driving the gaps. Players have the ability to drive gaps that will hit many ground balls regularly.

Despite the importance of discipline to OBP, swing speed is a key element for improving OBP. To enhance swing speed, it is advisable to become stronger, but use the weight area and lift weights to improve baseball.

While strength may improve swing speed, the beauty of baseball is that we see players with little stature leading the gap mostly because of their swing speed. Swing speed improves the bat speed, which in turn makes defense to the field harder while the ball is playing.

Here’s a fantastic video about growing bat speed:

Tip #2 – Plate Discipline

As we said, OBP is about getting to the base, whether it’s hitting a pitch or walking. Along three of these criteria, we find that the OBP is the greatest among some of the most disciplined batters on the plate.

Many people believe the more disciplined you are, the more you go. This is accurate, however it’s unknown that players are better hitters when they swing at excellent pitches while talking about plate Discipline.

One key to hitting is barreling the pitch, particularly for younger players. Good contact is important in the barrel of the bat to success on the plate. This is the consequence of discipline that many young baseball players find challenging.

Here’s a nice debate on being disciplined:

Tip #3 – Practice More

As we said, OBP is about getting to the base, whether it’s hitting a pitch or walking. Along three of these criteria, we find that the OBP is the greatest among some of the most disciplined batters on the plate.

Many people believe the more disciplined you are, the more you go. This is accurate, however it’s unknown that players are better hitters when they swing at excellent pitches while talking about plate Discipline.

One key to hitting is barreling the pitch, particularly for younger players. Good contact is important in the barrel of the bat to success on the plate. This is the consequence of discipline that many young baseball players find challenging.

 

Related: How Many Innings Are In A Baseball Game?

 

OBP Definition

OBP refers to how often a hitter reaches base each plate appearance. Base times include hits, walks and hits, but do not include errors, times at a fielder’s choice or a dropped third strike. (Separately, slaughter bunts are eliminated completely from the equation since the decision to sacrifice themselves is seldom a hitter’s decision but rather the choice of the manager as part of an in-game plan.)

A hitter’s objective is to avoid doing an exit, and a basic percentage indicates which batters have performed the best.

The base % may also be used for pitchers as an assessment tool, but this is done less often. In such situations, it is called on-base versus.

Origin:

The basic rate was a statistical figure developed by Dodgers executive branch Rickey and statistician Allan Roth in the 1940s-50s. It was not until 1984 an official statistic.

In A Call

on-base average

 

Related: How Much Does a Baseball Weigh?

 

How Is On Base Percentage Calculated?

A reasonably easy method – while more complex than the batting average – is based on the basis percentage. The numbering device comprises several methods a player may base himself on which to create outs:

Hits + Hits + Pitch Hits +

The third factor may surprise you, but it’s sensitive. If a hitter is struck a pitch a) it hurts, and b) the batter goes on the bottom without an out. It thus helps to increase their basic proportion.

There’s the numerator, therefore. What’s the denominator? Four components are included here:

In Bats + Walks + Pitch hit + Sacrifice Flies

In bats, this is an important factor exactly as in the calculation of average batting. But what counts here is the total number of times a player approaches the plate and either a) does not out or b).

If a player gets a hit or walks, he won’t do a thing. And now we know that with a pitch hit the same thing is true.

Now, we know whether the batter gets tagged off or if the throw beats the batter on the ground, that guy does a negative thing. But what about flies of sacrifice?

After all, the hitter is in a sacrificial fly, but another baserunner is going or even running? Should this not be considered a net positive?

Nope. Note that the limited resource is out, not running. Unlimited runs may be obtained. You have just 27 outs to accomplish it.

It’s not essential to get out of it, but sacrifice flies are outs. They are thus a net negative and count the formula against you.

All in all, the calculation for the basic percentage works as such:

OBP =               hits + walks + hit by pitch

                        ________________________

             at bats + walks + hit by pitch + sacrifice flies

 

Technically, there are additional factors like choosing a fielder and sacrificing colors. But remember, they are really just outs. You are using your limited resource.

Bottom Line

With today’s concentration on a base percentage greater than ever in the history of baseball, I have to wonder – precisely what is a good OBP? I mean, we know that Barry Bonds was unusually excellent in 2004 and Ike Davis’s actual .236 was very poor. And we know. We know. Four hundred is really excellent, but what is the interruption point? I decided to dig some.

I thought we had to compare it to a number we already knew about. I selected average batting since the two statistics are closely linked anyhow. We know that. The gauge is 300 – if a player hits .300 or above he is extremely excellent. The more he drops from about 300, the worse he is. I thus decided to have an OBP figure which would have an average of 300 bats — beyond this, it’s extremely excellent, and the more a player falls below, the worse it is.

I started to look at all-time MLB statistics. Roughly 200 players have average lifetime batting of 300. Then I looked at the % of my career on the basis. I came down to the 200th position, with the number about 3370. Then I looked at batting statistics last year. Twenty-five players have batted 300. And suppose what? What? The 25th OBP, you predicted, was about 370.

Therefore, 370 seems to be the number. That example, if a player has a 370, it is equal to 300, therefore we know that he belongs to the top. A 400 OBP is equivalent to 330, which is really extremely excellent. On the other hand, when a guy as a .350 OPB is as if he’s hitting .280, that’s still okay. However, it is like hitting .230, if it has a .300 OPB, that’s not very good at all.

I’m sure I’m not the first person to come up with such a formula. I don’t know how others thought things, but this is the formula that I’ll use to understand the basic %.

Add a Comment

Your email address will not be published. Required fields are marked *

Pin It on Pinterest